BBTZN - EZ WELD CLEAR PVC SOLVENT CEMENT
- MSDS: BBTZN
- Manufacturer: PCI INDUSTRIES INC
- Product Name: EZ WELD CLEAR PVC SOLVENT CEMENT
- National Stock Number: 8040-00F006146
Product Identification
Product ID:EZ WELD CLEAR PVC SOLVENT CEMENT
MSDS Date:01/01/1991
FSC:8040
NIIN:00F006146
MSDS Number: BBTZN
Responsible Party
RIVIERA BEACH, FL 33419
Emergency Phone: (407) 844-0241 OR (800) 424-9300
Info Phone: (407) 844-0241
Preparer: HARRY AUSTIN
Cage: FO174
Contractor
Telephone: (407) 844-0241
Cage: FO174
Ingredients
TETRAHYDROFURAN
CAS: 109-99-9
RTECS: LU5950000
Fraction By Weight: 28%
OSHA PEL 200 PPM
ACGIH TLV: 590 MG/CUM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
2-BUTANONE (METHYL ETHYL KETONE) (MEK)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 55%
OSHA PEL 200 PPM
ACGIH TLV: 590 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
CYCLOHEXANONE, KETOHEXAMETHYLENE
CAS: 108-94-1
RTECS: GW1050000
Fraction By Weight: 7%
OSHA PEL S, 50 PPM
ACGIH TLV: S, 25 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
CHLOROETHYLENE POLYMER, POLYVINYLCHLORIDE, POLYVINYL
CAS: 9002-86-2
RTECS: KV0350000
Fraction By Weight: 10%
Hazards
LD50 LC50 Mixture:ORAL LD50 (RAT): 1620 MG/KG.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:
IRRITATION/REDNESS/TEARING/BLURRED VISION/BURN/TRANSIENT
CORNEAL/CONJUNCTIVAL INJURY. SKIN:
IRRITATION/DEFATTING/DRYNESS/RASH. INHALATION: NASAL/RESPIRATORY
IRRITATION/HEADACE/VOMITING/INCOORDIN ATION. INGESTION:
GASTROINTESTINAL
IRRITATION/NAUSEA/DIZZINESS/VOMITING/DIARRHEA/HEADACHE/STUPOR.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: IRRITATION/REDNESS/TEARING/BLURRED
VISION/BURN/TRANSIENT CORNEAL/CONJUNCTIVAL INJURY. SKIN:
IRRITATION/DEFATTING/DRYNESS/RASH. INHALATION: NASAL & RESPIRATORY
IRRITATION/HEADACHE/VOMITING/INCOOR DINATION. INGESTION:
GASTROINTESTINAL
IRRITATION/NAUSEA/DIZZINESS/VOMITING/DIARRHEA/HEADACHE/STUPOR.
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER. SKIN: WASH W/MILD SOAP &
WATER. INHALATION: REMOVE TO FRESH AIR. IF BREATHING IS DIFFICULT,
ADMINISTER OXYGEN. IF BREATHING STOPS, GIVE ARTIFICIAL RESPIRATION.
KEEP WARM & QUIET. INGESTION: DILUTE BY GIVING TWO GLASSES OF
WATER. KEEP WARM & QUIET. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:6F
Lower Limits:2%
Upper Limits:12%
Extinguishing Media:ALCOHOL RESISTANT FOAM, CO2 OR DRY CHEMICAL
Fire Fighting Procedures:WEAR SCBA W/FULL FACEPIECE OPERATED IN
PRESSURE-DEMAND OR OTHER POSITIVE PRESSURE MODE WHEN FIGHTING
FIRES.
Unusual Fire/Explosion Hazard:VAPORS ARE >AIR & MAY TRAVEL ALONG
GROUND/MOVE BY VENTILATION TO IGNITION SOURCE & IGNITE AT LOCATIONS
DISTANT FROM HANDLING POINT. AUTOIGNITION TEMP: 610F.
Accidental Release
Spill Release Procedures:EXTINGUISH IGNITION SOURCES. ABSORB W/EARTH,
SAND, OR SIMILAR INERT MATERIAL. DIKE TO CONTAIN LARGE SPILLS.
DILUTE W/WATER & USING INERT ABSORBENT MATERIAL, SHOVEL INTO
CONTAINERS. FLUSH SPILL AREA W/ WATER.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED. USE W/ADEQUATE
VENTILATION.
Other Precautions:AVOID BREATHING VAPOR. AVOID CONTACT W/SKIN, EYES, &
CLOTHING.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED AIR SUPPLIED RESPIRATOR
WHEN >TLV.
Ventilation:SUFFICIENT MECHANICAL (GENERAL/LOCAL EXHAUST) TO KEEP
Protective Gloves:RUBBER, BUTYL OR OTHER IMPERVIOUS
Eye Protection:CHEMICAL SAFETY SPLASH GLASSES
Other Protective Equipment:EYE BATH, SAFETY SHOWER, FACE SHIELD, &
RUBBER SAFETY BOOTS
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH THOROUGHLY AFTER USING.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:150F
Vapor Pres:114
Vapor Density:2.5
Spec Gravity:0.88
Evaporation Rate & Reference:(N-BU AC = 1): 3.8
Solubility in Water:40%
Appearance and Odor:LIGHT YELLOW COLORED LIQUID W/STRONG SOLVENT ODOR
Percent Volatiles by Volume:90%
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:PILOT LIGHTS, FLAMES, SPARKS, HEATER,
ELECTRIC MOTORS, STATIC DISCHARGE, HEAT OR OTHER IGNITION SOURCE
Hazardous Decomposition Products:CO2, CO & VARIOUS HYDROCARBONS
Disposal
Waste Disposal Methods:COLLECT & DESTROY BY LIQUID INCINERATION OR
SOLIDIFY W/INERT MATERIAL & DISPOSE OF AS SOLID WASTE ACCORDING TO
LOCAL, STATE, & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.